Gate & Barrier Operators

6" Steel Wheel Cover (use with LiftMaster Power Wheel)

Model 22206S · LiftMaster

Strong welded construction.

Adjustable Hinge - Bolt Gate, Bolt Post (Prime Coated)

Model 3150P · LiftMaster

Heavy duty for maximum durability.

Adjustable Hinge - Bolt Gate, Bolt Post (Zinc Plated)

Model 3150Z · LiftMaster

Heavy duty for maximum durability.

Adjustable Hinge - Flat Mount, Both Sides (Prime Coated)

Model 3100P · LiftMaster

Heavy duty for maximum durability.

Adjustable Hinge - Flat Mount, Both Sides (Zinc Plated)

Model 3100Z · LiftMaster

Heavy duty for maximum durability.

GUARDIAN Adjustable Hinge - Flat Mount, Both Sides (Prime Coated)

Model 3110P · LiftMaster

LiftMaster GUARDIAN Adjustable Hinge - Flat Mount, Both Sides (Prime Coated) (model 3110P) — Gate Hinges, listed under gate & barrier operators in our LiftMaster range. Ask us to confirm fit for your door or opener.

Heavy Duty Hinge - Flat mount, both sides. (Corrosion Protected-Zinc)

Model 2000Z · LiftMaster

Heavy duty for maximum durability.

Heavy Duty Roller Cage Bearing Hinge - (Unfinished)

Model 2000P · LiftMaster

Flat mount, both sides.

Heavy Duty Roller Cage Bearing Hinge - (Unfinished)

Model 2000U · LiftMaster

Flat mount, both sides.

Heavy Duty Roller Cage Bearing Hinge - Bolt to Gate/Post - (Prime Coated)

Model 2050P · LiftMaster

Heavy duty for maximum durability.

Heavy Duty Roller Cage Bearing Hinge - Bolt to Gate/Post - (Zinc)

Model 2050Z · LiftMaster

Heavy duty for maximum durability.

Heavy Duty Roller Cage Bearing Hinge Round Mount, Prime Coated

Model 2010P · LiftMaster

Heavy duty for maximum durability.

Heavy-Duty Hinge - Bolt to Gate, Bolt to Post (Prime Coated)

Model 2062P · LiftMaster

Allows for 180° Swing High Security Welded Pin Design Limited Lifetime Warranty

Heavy-Duty Hinge - Flat Mount, Both Sides (Prime Coated)

Model 2060P · LiftMaster

Allows for 180° Swing High Security Welded Pin Design Limited Lifetime Warranty

Heavy-Duty Hinge - Flat Mount, Both Sides (Unfinished)

Model 2060U · LiftMaster

Allows for 180° Swing High Security Welded Pin Design Limited Lifetime Warranty

Heavy-Duty Hinge - Flat Mount, Both Sides (Zinc Plated)

Model 2060Z · LiftMaster

Allows for 180° Swing High Security Welded Pin Design Limited Lifetime Warranty

Heavy-Duty Hinge - Flat to Gate, Round to Post (Prime Coated)

Model 2015P · LiftMaster

Heavy duty for maximum durability.

Heavy-Duty Hinge - Flat to Gate, Round to Post (Zinc Plated)

Model 2015Z · LiftMaster

Heavy duty for maximum durability.

Heavy-Duty Hinge - Flat to gate, bolt to post. (Prime Coated)

Model 2025P · LiftMaster

Heavy duty for maximum durability.

Heavy-Duty Hinge - Round Mount, Both Sides (Zinc Plated)

Model 2010Z · LiftMaster

Heavy duty for maximum durability.

Heavy-Duty Hinge - Round to Gate, Round to Post (Prime Coated)

Model 2064P · LiftMaster

Heavy duty for maximum durability.

Heavy-Duty Hinge - Round to Gate, Round to Post (Zinc Plated)

Model 2064Z · LiftMaster

Heavy duty for maximum durability.

LiftMaster® Elite Series® Power Hinge®

Model POWERHINGE · LiftMaster

LiftMaster LiftMaster® Elite Series® Power Hinge® (model POWERHINGE) — Gate Hinges, listed under gate & barrier operators in our LiftMaster range. Ask us to confirm fit for your door or opener.

OLYMPIAN Hinge Aluminum with Steel Yoke

Model 3300AS · LiftMaster

Adjust slot in yoke for ease of installation.

Specialty Hinge - Flat Mount, Both Sides (Stainless Steel)

Model 2180SS · LiftMaster

Heavy duty construction for maximum durability.

Specialty Hinge - Flat to Gate, Flat to Post (Aluminum/Steel)

Model 2170AS · LiftMaster

Heavy duty construction for maximum durability.

Specialty Hinge - Stainless Steel Bolt to Gate, Bolt to Post

Model 2185SS · LiftMaster

Heavy duty construction for maximum durability.

Standard Hinge - Bolt to Gate, Bolt to Post (Prime Coated)

Model 2150P · LiftMaster

Heavy duty for maximum durability.

Standard Hinge - Bolt to Gate, Bolt to Post (Zinc Plated)

Model 2150Z · LiftMaster

Heavy duty for maximum durability.

Standard Hinge - Flat Mount, Both Sides (Prime Coated)

Model 2100P · LiftMaster

Heavy duty for maximum durability.

Standard Hinge - Flat Mount, Both Sides (Unfinished)

Model 2100U · LiftMaster

Heavy duty for maximum durability.

Standard Hinge - Flat Mount, Both Sides (Zinc Plated)

Model 2100Z · LiftMaster

Heavy duty for maximum durability.

Standard Hinge - Flat to Gate, Bolt to Post (Prime Coated)

Model 2125P · LiftMaster

Heavy duty for maximum durability.

Standard Hinge - Flat to Gate, Round to Post (Prime Coated)

Model 2115P · LiftMaster

Heavy duty for maximum durability.

Standard Hinge - Round Mount, Both Sides (Prime Coated)

Model 2110P · LiftMaster

Heavy duty for maximum durability.

Standard Hinge - Round Mount, Both Sides (Zinc Plated)

Model 2110Z · LiftMaster

Heavy duty for maximum durability.

Standard Hinge Bolt to Gate, Bolt to Post (Black Powder Coat)

Model 2150B · LiftMaster

Heavy duty for maximum durability.

3" Guide Roller

Model 22413GR · LiftMaster

Attractive self-contained and easy-to-install system.

6" Guide Roller

Model 22416GR · LiftMaster

Attractive self-contained and easy-to-install system.

Adjustable Guide Roll Bracket (Required for Dual System)

Model 2241GRB · LiftMaster

Attractive self-contained and easy-to-install system.

GDI SGWD-SB Slide Gate Operator

Model SGWD-SB · GDI

Commercial/industrial slide gate operator from GDI's SGWD family, built in a weatherproof steel cabinet with chain drive. GDI's two published spec tables give different speed and cycle figures for this model, so both are listed.

• Brochure V1.01: 5-36 in/s, max. gate 2,500 lb, 2,500 cycles/day
• Catalogue spec Ver. 1.031a: 10-36 in/s, 2,500 lb, 8,000 cycles/day
• No limit on slide gate length
• Base configuration includes brake with manual release
• Runs on 115, 208, 230, 460 or 575 VAC, single or three phase, 50/60 Hz (one operator for all voltages)
• Powder-coated 11-gauge steel case, lockable door, double-lock maintenance access door, chain-drive housing
• Pedestal mounted (pedestals not included); 20 ft loop of #50 or #60 chain included, size depends on model
• TorqueLock mode lets the gate be pushed and recover position on the next cycle

GDI SGWD-SH Slide Gate Operator

Model SGWD-SH · GDI

Commercial/industrial slide gate operator from GDI's SGWD family, built in a weatherproof steel cabinet with chain drive. GDI's two published spec tables give different speed and cycle figures for this model, so both are listed.

• Brochure V1.01: 3-17 in/s, max. gate 8,500 lb, 1,800 cycles/day
• Catalogue spec Ver. 1.031a: 7-20 in/s, 8,500 lb, 5,000 cycles/day
• No limit on slide gate length
• Base configuration includes brake with manual release
• Runs on 115, 208, 230, 460 or 575 VAC, single or three phase, 50/60 Hz (one operator for all voltages)
• Powder-coated 11-gauge steel case, lockable door, double-lock maintenance access door, chain-drive housing
• Pedestal mounted (pedestals not included); 20 ft loop of #50 or #60 chain included, size depends on model
• TorqueLock mode lets the gate be pushed and recover position on the next cycle

GDI SGWD-SL Slide Gate Operator

Model SGWD-SL · GDI

Commercial/industrial slide gate operator from GDI's SGWD family, built in a weatherproof steel cabinet with chain drive.

• Brochure V1.01: 5-38 in/s, max. gate 1,200 lb, 4,000 cycles/day
• No limit on slide gate length
• Base configuration includes brake with manual release
• Runs on 115, 208, 230, 460 or 575 VAC, single or three phase, 50/60 Hz (one operator for all voltages)
• Powder-coated 11-gauge steel case, lockable door, double-lock maintenance access door, chain-drive housing
• Pedestal mounted (pedestals not included); 20 ft loop of #50 or #60 chain included, size depends on model
• TorqueLock mode lets the gate be pushed and recover position on the next cycle
• Network up to 128 gates; dual gate operation

GDI SGWD-SM Slide Gate Operator

Model SGWD-SM · GDI

Commercial/industrial slide gate operator from GDI's SGWD family, built in a weatherproof steel cabinet with chain drive. GDI's two published spec tables give different speed and cycle figures for this model, so both are listed.

• Brochure V1.01: 5-30 in/s, max. gate 4,200 lb, 4,200 cycles/day
• Catalogue spec Ver. 1.031a: 8-18 in/s, 4,200 lb, 5,000 cycles/day
• No limit on slide gate length
• Base configuration includes brake with manual release
• Runs on 115, 208, 230, 460 or 575 VAC, single or three phase, 50/60 Hz (one operator for all voltages)
• Powder-coated 11-gauge steel case, lockable door, double-lock maintenance access door, chain-drive housing
• Pedestal mounted (pedestals not included); 20 ft loop of #50 or #60 chain included, size depends on model
• TorqueLock mode lets the gate be pushed and recover position on the next cycle

GDI GLWD-GB Barrier Lift Gate Operator

Model GLWD-GB · GDI

Traffic-control barrier arm operator from GDI's GLWD family for parking lots, underground parking and secured facilities.

• Brochure V1.02: max. arm 14 ft, opens in 1-6 s, articulated arm available, 8,000 cycles/day
• Aluminum arm (3" x 1" rectangular tube) included
• Arm moves from horizontal to fully vertical in as little as 1.0 s
• Runs on 115, 208, 230, 460 or 575 VAC, single or three phase, 50/60 Hz (one operator for all voltages)
• Powder-coated 11-gauge steel case with lockable door; arm and case mounting on either side
• Electro-mechanical holding brake, disengageable for manual operation; no springs for load balancing
• Master/slave configuration; network up to 128 gates
• Battery backup: three 7 Ah sealed batteries (36 VDC)

GDI GLWD-GH Barrier Lift Gate Operator

Model GLWD-GH · GDI

Traffic-control barrier arm operator from GDI's GLWD family for parking lots, underground parking and secured facilities. Two GDI documents give different timing and cycle figures for this model; both are listed.

• Brochure V1.02: max. arm 20 ft, opens in 2.5-8 s, 5,000 cycles/day
• Catalogue Ver. 1.10: max. arm 20 ft, opens in 1.5-6 s, 6,000 cycles/day
• Articulated arm not available; arm purchased separately
• Arm moves from horizontal to fully vertical in as little as 1.0 s
• Runs on 115, 208, 230, 460 or 575 VAC, single or three phase, 50/60 Hz (one operator for all voltages)
• Powder-coated 11-gauge steel case with lockable door; arm and case mounting on either side
• Electro-mechanical holding brake, disengageable for manual operation; no springs for load balancing
• Master/slave configuration; network up to 128 gates

GDI GLWD-GL Barrier Lift Gate Operator

Model GLWD-GL · GDI

Traffic-control barrier arm operator from GDI's GLWD family for parking lots, underground parking and secured facilities.

• Brochure V1.02: max. arm 10 ft, opens in 1-6 s, articulated arm available, 5,000 cycles/day
• Aluminum arm (3" x 1" rectangular tube) included
• Arm moves from horizontal to fully vertical in as little as 1.0 s
• Runs on 115, 208, 230, 460 or 575 VAC, single or three phase, 50/60 Hz (one operator for all voltages)
• Powder-coated 11-gauge steel case with lockable door; arm and case mounting on either side
• Electro-mechanical holding brake, disengageable for manual operation; no springs for load balancing
• Master/slave configuration; network up to 128 gates
• Battery backup: three 7 Ah sealed batteries (36 VDC)

GDI GLWD-GM Barrier Lift Gate Operator

Model GLWD-GM · GDI

Traffic-control barrier arm operator from GDI's GLWD family for parking lots, underground parking and secured facilities.

• Max. arm 18 ft, opens in 1-6 s, 8,000 cycles/day; articulated arm not available
• Arm purchased separately
• Arm moves from horizontal to fully vertical in as little as 1.0 s
• Runs on 115, 208, 230, 460 or 575 VAC, single or three phase, 50/60 Hz (one operator for all voltages)
• Powder-coated 11-gauge steel case with lockable door; arm and case mounting on either side
• Electro-mechanical holding brake, disengageable for manual operation; no springs for load balancing
• Master/slave configuration; network up to 128 gates
• Battery backup: three 7 Ah sealed batteries (36 VDC)

Industrial-Duty Wishbone Arm Barrier Gate Operator

Model BG790 · LiftMaster

Ideal for airports, parking garages, and manufacturing plants.

Mega Arm High Performance Commercial DC Barrier Gate

Model MA · LiftMaster

Rated for 6000 cycles per day with an opening speed of 2.5 seconds.

Mega Arm Sprint High-Speed Commercial DC Barrier Gate

Model MAS · LiftMaster

Rated for 10,000 cycles per day with an opening speed of 0.9 seconds.

Mega Arm Sprint Tower High-Speed Commercial DC Barrier Gate

Model MAST · LiftMaster

Rated for 10,000 cycles per day with an opening speed of 0.9 seconds.

Mega Arm Tower High Performance Commercial DC Barrier Gate

Model MAT · LiftMaster

Rated for 6000 cycles per day with an opening speed of 2.5 seconds.

TECHNA Industrial Barrier Gate Operator

Model IBG24DC · LiftMaster

.list-bold {font-family: 'AktivGrotesk-Medium'; } Quick Deployment Designed for wide‑lane applications, TECHNA Industrial delivers a modern, intuitive, lightweight, logic‑driven operator that accelerates installation.

TECHNA Parking Barrier Gate Operator

Model PBG24DC · LiftMaster

Optimize Operations and Maximize Revenue: When connected to myQ software, TECHNA provides insights into traffic flow, peak hours, and vehicle vs.

• Battery Backup: Standard 2 x 12V 7Ah batteries, Optional 2 x 12V 33Ah batteries available
• myQ Compatibility: Works with myQ, myQ Facility, or myQ Enterprise
• Power: 120Vac/230 Vac 1 PH
• Wi-Fi: Yes
• Speed/Per Second: 1.9s Open/Close time
• Motor Type: 24V DC Motor Drive
• Soft Start/Stop: Yes
• Warranty: 2 Years

Fire Access Box With Cable Release

Model ACP17 · LiftMaster

LiftMaster Fire Access Box With Cable Release (model ACP17) — Gate Operator Accessories, listed under gate & barrier operators in our LiftMaster range. Ask us to confirm fit for your door or opener.

Heavy Duty Long Arm for HDSW24UL Swing Gate Operator. Reinforced for gate applications of 2,500 – 4,500 lbs. or 14 – 22 ft.

Model HDLGARM · LiftMaster

Designed specifically for use with HDSW24UL Heavy Duty gate operator.

SOLAR-PANEL KIT,12V,10W

Model SP10W12V · LiftMaster

SOLAR-PANEL KIT,12V,10W

Self-Regulating Heater & Coil for CSW200UL

Model G6518CSW · LiftMaster

Protects the system to -40 degrees °F.

1/2 and 1 HP AC High Traffic Commercial Slide Gate Operators

Model SL3000UL · LiftMaster

Ideal for heavy-traffic applications 1/2 HP rated for gates 50ft and 1,000 lbs.

1/2 and 1 HP AC High Traffic Commercial Swing Gate Operators

Model CSW200UL · LiftMaster

For high-traffic applications.

12VDC Residential/Light Commercial Swing Gate Operator

Model RSW12ULMC · LiftMaster

Ideal for residential gates.

12VDC Solar Residential Linear Actuator Package

Model LA412UL · LiftMaster

Solar optimized system.

24VDC Continuous Duty Industrial Slide Gate Operator

Model IHSL24ULMC · LiftMaster

Continuous Duty BLDC Industrial Operator.

24VDC Continuous Duty Industrial Slide Gate Operator

Model INSL24ULMC · LiftMaster

Continuous Duty BLDC Industrial Operator Rated for heavy gates up to 2200 lbs.

24VDC Heavy-Duty Variable Speed Slide Gate Operator

Model HDSL24UL · LiftMaster

.star-rating {display: none;} .o-pdp-reviews {display: none;} #select-review {display: none;} #stickyNav ul li:nth-child(6) {display: none;} Ideal for heavy gate and extreme applications.

24VDC Heavy-Duty Variable Speed Swing Gate Operator

Model HDSW24UL · LiftMaster

Ideal for heavy gate and extreme applications.

24VDC High-Traffic Commercial Slide Gate Operator

Model CSL24UL · LiftMaster

Ideal for high-traffic, heavy-duty application.

24VDC High-Traffic Commercial Slide Gate Operator

Model CSL24ULWKMC · LiftMaster

Ideal for high-traffic, heavy-duty application.

24VDC High-Traffic Commercial Swing Gate Operator

Model CSW24UL · LiftMaster

Ideal for high-traffic, heavy-duty application.

24VDC Residential Linear Actuator

Model LA400UL · LiftMaster

Rated for gates up to 16ft.

24VDC Residential/Light Commercial Linear Actuator

Model LA500UL · LiftMaster

Rated for gates up to 18ft.

CBG24DC

Model CBG24DC · LiftMaster

Highly Visible Design: Programmable LEDs for the tower and arm to increase visibility and reduce strikes.

Residential / Light Commercial Slide Gate Operator

Model RSL12UL · LiftMaster

Battery Backup.

SL1000ULC

Model SL1000ULC · LiftMaster

Max gate weight : 1000 kg / 2205 lbs Max gate travel distance : 12m / 39 ft Powered by myQ: Monitor and control your gate remotely through the myQ app.