Garage Door Safety Sensors

100mA External Power Supply with a 28 ft. length cord

Model 100MAPS · LiftMaster

100MAPS is an external power supply intended for use with LC-36A Light Curtain or PRE-SENSOR Trailer Presence Sensor.

4 ft small profile resistive edge with aluminum channel

Model S504AL · LiftMaster

Fast and easy to install.

4 ft. Monitored Large Profile Resistive Edge with aluminum channel

Model L504AL · LiftMaster

Fast and easy to install.

5 ft Monitored Large Profile Resistive Edge with aluminum channel

Model L505AL · LiftMaster

Fast and easy to install.

5 ft small profile resistive edge with aluminum channel

Model S505AL · LiftMaster

Fast and easy to install.

6 ft monitored large profile resistive edge with aluminum channel

Model L506AL · LiftMaster

Fast and easy to install.

6 ft small profile resistive edge with aluminum channel

Model S506AL · LiftMaster

Fast and easy to install.

Aluminum Edge Channel for Large or Small Profile Edges

Model L50CHAL · LiftMaster

10ft.

Commercial Photo Eyes

Model CPS-U · LiftMaster

Standard photo-eye included with Logic 5.0 and Medium-Duty Commercial Operators.

Elite Plug-in Loop Detector

Model AELD · LiftMaster

LiftMaster Elite Plug-in Loop Detector (model AELD) — Safety Devices, listed under safety & sensors in our LiftMaster range. Ask us to confirm fit for your door or opener.

Heavy-Duty Monitored Through Beam Photo Eye

Model CPSUN4G · LiftMaster

Commercial Protector System, Black

Heavy-Duty Non-Monitored Retro-Reflective Photo Eye

Model AOMRON · LiftMaster

40 ft.

LiftMaster myQ® Smart Garage® Door Sensor

Model G821LMB-2SENSOR · LiftMaster

Add a second opener to myQ Smart Garage® Hub.

Light Curtain

Model LC-36A · LiftMaster

Limited stock, available while supplies last.

Monitored Dual-Sided Photo Eyes

Model CPS-OPEN4 · LiftMaster

Flexible housing protects against direct water-spray and corrosion.

Monitored Light Curtain

Model LC36M · LiftMaster

The Monitored Light Curtain is a primary safety entrapment protection device that is compliant with UL 325.

Monitored Retro Reflective Photo Eye

Model LMRRUL · LiftMaster

Long Range Sensing distance up to 50 ft Requires power only on one side of the installation.

Monitored Retro-Reflective Photo Eye for Commercial Door Applications

Model CPS-RPEN4 · LiftMaster

PHOTO-EYE,N4,1-SIDED,MONITORED

Monitored Through Beam Photo Eyes with wider beam

Model LMTBUL · LiftMaster

Long Range Sensing distance up to 90 ft.

Monitored Wireless Edge Kit

Model LMWEKITU · LiftMaster

Protects up to 8 entrapment points.

Motion Detector

Model 50-HERK2 · LiftMaster

Differentiates between people and/or vehicle traffic.

Plug In Loop Detector

Model LOOPDETLM · LiftMaster

Plug-in connector; No wiring needed.

Sensing Probe Single Piece

Model 50-CP4 · LiftMaster

Self-contained free exit system designed to detect moving vehicle and open your automatic gate.

Small Profile Edge 82 ft roll

Model S50 · LiftMaster

Fast and easy to install.

Small Profile ends kit

Model S50E · LiftMaster

Fast and easy to install.

Manaras HOOD001 Photo eye hood – Sunlight reflection protection hood

Model HOOD001 · Manaras

Sun hood that shields a photo-eye receiver from reflections.

• Sunlight reflection protection hood, compatible with PHOTO061 receiver unit
• Sunlight protection hood / visor
• To be installed on the receiver unit of compatible thru-beam type photoelectric cells to increase transmission accuracy
• Dimensions: 1.5'' W x 1'' Ø
• Includes: Hood, hardware
• Compatible with: PHOTO061 / 061A (receivers)

Manaras HOOD002 Photo eye hood – Sunlight protection hood / visor

Model HOOD002 · Manaras

Sun hood that shields a photo-eye receiver from reflections.

• Sunlight protection hood / visor
• To be installed on receiver unit of compatible thru-beam type photoelectric cells to increase transmission accuracy
• Dimensions: 0.71'' W x 0.47'' Ø
• Includes: Hood

Manaras PHOTO008C3 Non-monitored thru-beam Photo Eye

Model PHOTO008C3 · Manaras

Non-monitored thru-beam photo eye that stops and reverses the door when the beam is blocked.

• Non-monitored, N4X enclosure, thru-beam type, indoor, 24V, 45' range, includes interface module
• Photoelectric cells and interface module
• Renders any monitored photoelectric cell compatible with non-monitored controls
• Various combinations available: PHOTO008C3 (includes PHOTO061 ), PHOTO008D1 (includes PHOTO065 ), PHOTO008E1 (includes PHOTO070 )
• For replacement interface module order: INTERFACE001

Manaras PHOTO008D1 Non-monitored retro-reflective Photo Eye

Model PHOTO008D1 · Manaras

Non-monitored retro-reflective photo eye that stops and reverses the door when the beam is blocked.

• Non-monitored, N4X enclosure, retro-reflective type, indoor, 24V, 5-50' range, includes interface module
• Photoelectric cells and interface module
• Renders any monitored photoelectric cell compatible with non-monitored controls
• Various combinations available: PHOTO008C3 (includes PHOTO061 ), PHOTO008D1 (includes PHOTO065 ), PHOTO008E1 (includes PHOTO070 )
• For replacement interface module order: INTERFACE001

Manaras PHOTO008E1 Non-monitored thru-beam Photo Eye

Model PHOTO008E1 · Manaras

Non-monitored thru-beam photo eye that stops and reverses the door when the beam is blocked.

• Non-monitored, N1 enclosure, thru-beam type, indoor, 24V, 5-45' range, includes interface module
• Photoelectric cells and interface module
• Renders any monitored photoelectric cell compatible with non-monitored controls
• Various combinations available: PHOTO008C3 (includes PHOTO061 ), PHOTO008D1 (includes PHOTO065 ), PHOTO008E1 (includes PHOTO070 )
• For replacement interface module order: INTERFACE001

Manaras PHOTO024 Reflector – Photoelectric cell reflector 3'' Ø

Model PHOTO024 · Manaras

Reflector for retro-reflective photo eyes.

• Photoelectric cell reflector 3'' Ø, compatible with PHOTO060
• Reflector
• Materials: Clear acrylic
• Dimensions: 0.37" W x 3.08'' Ø
• Includes: Reflector
• Compatible with: PHOTO060

Manaras PHOTO045 Non-monitored thru-beam Photo Eye

Model PHOTO045 · Manaras

Non-monitored thru-beam photo eye that stops and reverses the door when the beam is blocked.

• Non-monitored, N4X aluminum hood (PHOTO015), infrared thru-beam type, exterior, 12-24V
• Non-monitored (NO / NC relay output)
• Type: Thru-beam
• Range: 3' to 115' (approx.)
• Interior / exterior use
• Nema 4X enclosure
• Materials: Polystyrene, polycarbonate cover (photocells), anodized aluminum (protective hoods)
• Operation Temperature: -40°C to 77°C (-40°F to 171°F)

Manaras PHOTO045M Monitored thru-beam Photo Eye

Model PHOTO045M · Manaras

Monitored thru-beam photo eye that stops and reverses the door when the beam is blocked.

• Monitored, N4X aluminum hood (PHOTO015), infrared thru-beam type, exterior, 12-24V
• Monitored
• Type: Thru-beam
• Range: 3' to 115' (approx.)
• Interior / exterior use
• Nema 4X enclosure
• Materials: Polystyrene, polycarbonate cover (photocells), anodized aluminum (protective hoods)
• Operation Temperature: -40°C to 77°C (-40°F to 171°F)

Manaras PHOTO059 Non-monitored thru-beam Photo Eye rated for hazardous locations

Model PHOTO059 · Manaras

Non-monitored thru-beam photo eye rated for hazardous locations that stops and reverses the door when the beam is blocked.

• Non-monitored, infrared modulated thru-beam type, harsh industrial environment, N4/7 Class I-Gr B/C/D, Class II-Gr E/F/G, Class III and IEC IP66, EExd IIC
• Non-monitored (NO / NC relay output)
• Type: Thru-beam
• Range: 3' to 115' (approx.)
• Classified hazardous location
• Nema 4X and 7 enclosure, NEC Class I Groups B / C / D, Class II Groups E / F / G, Class III, EExd IIC
• Materials: Aluminum die-cast, epoxy coating
• Operation Temperature: -40°C to 77°C (-40°F to 171°F)

Manaras PHOTO060 Non-monitored retro-reflective Photo Eye

Model PHOTO060 · Manaras

Non-monitored retro-reflective photo eye that stops and reverses the door when the beam is blocked.

• Non-monitored, N4/12 & IP67 enclosure, retro-reflective type, exterior, 39' range, includes 3'' Ø reflector
• Non-monitored (NO / NC relay output)
• UL325 Recognized Component
• Type: Retro-reflective
• Range: 39' (approx.)
• Interior / exterior use
• Nema 4/12, IP67 enclosure
• Materials: Reinforced ABS-PC

Manaras PHOTO061 Monitored thru-beam Photo Eye

Model PHOTO061 · Manaras

Monitored thru-beam photo eye that stops and reverses the door when the beam is blocked.

• Monitored, N4X enclosure, thru-beam type, 4-wire, industrial environment, 45' range
• Monitored
• UL325 Recognized Component
• Type: Thru-beam
• Range: 5' to 45' (approx.)
• Industrial environments
• Nema 4X, IP65 enclosure
• Materials: Thermoplastic elastomer (TPE)

Manaras PHOTO065 Monitored retro-reflective Photo Eye

Model PHOTO065 · Manaras

Monitored retro-reflective photo eye that stops and reverses the door when the beam is blocked.

• Monitored, N4X enclosure, retro-reflective type, 2-wire, harsh environment, 5-50' range
• Monitored
• UL325 Recognized Component
• Type: Retro-reflective
• Range: 5' to 40' (approx.)
• Harsh environments
• Nema 4X, IP65 enclosure
• Materials: Polyamide and steel

Manaras PHOTO070 Monitored thru-beam Photo Eye

Model PHOTO070 · Manaras

Monitored thru-beam photo eye that stops and reverses the door when the beam is blocked.

• Monitored, N1 enclosure, thru-beam type, 2-wire, indoor, 45' range
• Monitored
• UL325 Recognized Component
• Type: Thru-beam
• Range: 5' to 45' (approx.)
• Interior use
• Nema 1 enclosure
• Materials: ABS-PC

Manaras PHOTO072 Reflector – Photoelectric cell reflector

Model PHOTO072 · Manaras

Reflector for retro-reflective photo eyes.

• Photoelectric cell reflector, compatible with PHOTO008D1/065
• Reflector
• Dimensions: 0.5" W x 3.5'' H x 2'' D
• Includes: Reflector
• Compatible with: PHOTO008D1, PHOTO065

Manaras PHOTO073 Non-monitored retro-reflective Photo Eye rated for hazardous locations

Model PHOTO073 · Manaras

Non-monitored retro-reflective photo eye rated for hazardous locations that stops and reverses the door when the beam is blocked.

• Non-monitored, intrinsically safe for hazardous locations, retro-reflective type, exterior, 5-15VDC, 30' range, includes 3'' Ø reflector
• Non-monitored
• Type: Retro-reflective
• Range: 30' (approx.)
• Classified hazardous location
• Nema 6P, IEC IP67, NAMUR enclosure
• Materials: Polyester (enclosure), acrylic (lens), stainless steel (hardware)
• Operation Temperature: -40°C to 70°C (-40°F to 158°F)

Manaras PHOTO074 Reflector – Photoelectric cell reflector 3'' Ø

Model PHOTO074 · Manaras

Reflector for retro-reflective photo eyes.

• Photoelectric cell reflector 3'' Ø, compatible with PHOTO073
• Reflector
• Material: clear acrylic
• Dimensions: 0.28'' W 3.19'' Ø
• Includes: Reflector
• Compatible with: PHOTO073

Manaras PHOTO075 Non-monitored retro-reflective Photo Eye

Model PHOTO075 · Manaras

Non-monitored retro-reflective photo eye that stops and reverses the door when the beam is blocked.

• Non-monitored, IP67 enclosure, retro-reflective type, exterior, 24V, 0.5'-32' range
• Non-monitored (NO / NC relay output)
• UL325 Recognized Component
• Type: Retro-reflective
• Range: 32' (approx.)
• Interior / exterior use
• IP67 enclosure
• Materials: ABS, PMMA (photocell, reflector), zinc-plated steel (bracket)

Manaras PHOTO076 Reflector – Photoelectric cell reflector 2'' x 2''

Model PHOTO076 · Manaras

Reflector for retro-reflective photo eyes.

• Photoelectric cell reflector 2'' x 2'', compatible with PHOTO075
• Reflector
• Materials: ABS, PMMA
• Dimensions: 0.31" W x 2.02" H x 2.02" D
• Includes: Reflector
• Compatible with: PHOTO075

Manaras PHOTO077 Non-monitored thru-beam Photo Eye

Model PHOTO077 · Manaras

Non-monitored thru-beam photo eye that stops and reverses the door when the beam is blocked.

• Non-monitored, IP67 enclosure, thru-beam type, exterior, 24V, 114-131' range
• Non-monitored (NO / NC relay output)
• UL325 Recognized Component
• Type: Thru-beam
• Range: 114' to 130' (approx.)
• Interior / exterior use
• IP67 enclosure
• Materials: ABS, PMMA (photocells), zinc-plated steel (brackets)

Manaras PHOTO067 Non-monitored thru-beam Photo Eye

Model PHOTO067 · Manaras

Non-monitored thru-beam photo eye that stops and reverses the door when the beam is blocked.

• Non-monitored optic sensing edge, Z-flap holder, thru-beam type, N4 Class 2 & IP65 enclosure, 8-30VAC/12-42VDC, 30' range

Manaras PHOTO067A Monitored thru-beam Photo Eye

Model PHOTO067A · Manaras

Monitored thru-beam photo eye that stops and reverses the door when the beam is blocked.

• Monitored, optic sensing edge, Z-flap holder, thru-beam type, N4 Class 2 & IP65 enclosure, 8-30VAC/12-42VDC, 30' range

Manaras PHOTO068A Non-monitored thru-beam Photo Eye

Model PHOTO068A · Manaras

Non-monitored thru-beam photo eye that stops and reverses the door when the beam is blocked.

• Non-monitored optic sensing edge, thru-beam type, N4 Class 2 & IP65 enclosure, 8-30VAC/ 12-42VDC, 30' range (50' range available $)

Manaras PHOTO068C Monitored thru-beam Photo Eye

Model PHOTO068C · Manaras

Monitored thru-beam photo eye that stops and reverses the door when the beam is blocked.

• Monitored, optic sensing edge, thru-beam type, N4 Class 2 & IP65 enclosure, 8-30VAC/12 42VDC, 30' range (50' range available $)

Manaras SENSEDGE002 Sensing edge – Non-monitored, electric edge ME-110

Model SENSEDGE002 · Manaras

Non-monitored sensing edge mounted on the door bottom to stop and reverse the door on contact.

• Non-monitored, electric edge ME-110, 2-wire, E/R/L wire outlet location, vertical / horizontal mount, for counter shutters / emergency switches / conveyors syst. / rolling grilles / barrier arms
• For counter shutters, emergency switches, conveyor systems, rolling grills, barrier arms
• Industry Codification: ME-110
• Type: 2-wire / NO, non-monitored
• Wire Outlet Location: Options available
• Vertical or horizontal mount
• Section: 0.88'' W x 0.75'' H
• Min. / Max. Length: 4' / 40'

Manaras SENSEDGE007 Sensing edge – Non-monitored, electric edge ME-113

Model SENSEDGE007 · Manaras

Non-monitored sensing edge mounted on the door bottom to stop and reverse the door on contact.

• Non-monitored, electric edge ME-113, 2-wire, E/R/L/U wire outlet location, vertical / horizontal mount, for sectional doors
• For sectional doors
• Industry Codification: ME-113
• Type: 2-wire / NO, non-monitored
• Wire Outlet Location: Universal, other options available
• Vertical or horizontal mount
• Section: 1.5'' W x 1.5'' H
• Min. / Max. Length: 4' / 40'

Manaras SENSEDGE007UM Sensing edge – Monitored, electric edge ME-113

Model SENSEDGE007UM · Manaras

Monitored sensing edge mounted on the door bottom to stop and reverse the door on contact.

• Monitored, electric edge ME-113, 10kOhms resistor, 2-wire, E/R/L/U wire outlet location, vertical / horizontal mount, for sectional doors, to be used with INTERFACE002
• For sectional doors
• Industry Codification: ME-113
• Type: 2-wire, monitored
• UL325 Recognized Component
• Wire Outlet Location: Universal, other options available
• Vertical or horizontal mount
• Section: 1.5'' W x 1.5'' H

Manaras SENSEDGE018U Sensing edge – Non-monitored, electric edge MT-22

Model SENSEDGE018U · Manaras

Non-monitored sensing edge mounted on the door bottom to stop and reverse the door on contact.

• Non-monitored, electric edge MT-22, 2-wire, E/R/L/U wire outlet location, horizontal mount, for rolling doors
• For rolling doors
• Industry Codification: MT-22
• Type: 2-wire / NO, non-monitored
• Wire Outlet Location: Universal, other options available
• Horizontal mount
• Section: 2'' W x 2'' H with 1.5'' flap
• Min. / Max. Length: 4' / 40'

Manaras SENSEDGE018UM Sensing edge – Monitored, electric edge MT-22

Model SENSEDGE018UM · Manaras

Monitored sensing edge mounted on the door bottom to stop and reverse the door on contact.

• Monitored, electric edge MT-22, 10kOhms resistor, 2-wire, E/R/L/U wire outlet location, horizontal mount, for rolling doors, to be used with INTERFACE002
• For rolling doors
• Industry Codification: MT-22
• Type: 2-wire, monitored
• UL325 Recognized Component
• Wire Outlet Location: Universal, other options available
• Horizontal mount
• Section: 2'' W x 2'' H with 1.5'' flap

Manaras SENSEDGE021 Sensing edge – Non-monitored, electric edge MU-22

Model SENSEDGE021 · Manaras

Non-monitored sensing edge mounted on the door bottom to stop and reverse the door on contact.

• Non-monitored, electric edge MU-22, 2-wire, E/R/L wire outlet location, vertical / horizontal mount, for sectional / aircraft hangar doors (sliding)
• For sectional doors / aircraft hangars (sliding doors)
• Industry Codification: MU-22
• Type: 2-wire / NO, non-monitored
• Wire Outlet Location: Options available
• Vertical or horizontal mount
• Section: 2'' W x 2'' H with 1.63'' flap
• Min. / Max. Length: 4' / 40'

Manaras SENSEDGE040 Sensing edge – Non-monitored, electric edge MU-21

Model SENSEDGE040 · Manaras

Non-monitored sensing edge mounted on the door bottom to stop and reverse the door on contact.

• Non-monitored, electric edge MU-21, 2-wire, E/R/L/U wire outlet location, vertical / horizontal mount, for sectional doors
• For sectional doors
• Industry Codification: MU-21
• Type: 2-wire / NO, non-monitored
• Wire Outlet Location: Universal, other options available
• Vertical or horizontal mount
• Dimensions: 1.75'' W x 1'' H with 1.63'' flap
• Min. / Max. Length: 4' / 40'

Manaras SENSEDGE042 Sensing edge – Monitored, opto sensing edge

Model SENSEDGE042 · Manaras

Monitored sensing edge mounted on the door bottom to stop and reverse the door on contact.

• Monitored, opto sensing edge, thru-beam type, includes modular bumpers, to be used with HOSE010
• Opto edge kit for sectional doors
• Monitored
• To be assembled in the field with HOSE010 (sold separately)
• UL325 Recognized Components (active), Nema 4X, IP65
• Operation Temperature: -25°C to 74°C (-13°F to 165°F)
• Power Supply: Self-powered by ECB main controller
• Mounting channels available

Manaras SENSEDGE044U Sensing edge – Non-monitored, electric edge ME-123

Model SENSEDGE044U · Manaras

Non-monitored sensing edge mounted on the door bottom to stop and reverse the door on contact.

• Non-monitored, electric edge ME-123, 2-wire, universal wire outlet location,vertical / horizontal mount, for sectional doors / sliding gates / conveyors / presses
• For sectional doors, sliding gates
• Industry Codification: ME-123
• Type: 2-wire / NO, non-monitored
• Wire Outlet Location: Universal
• Vertical or horizontal mount
• Section: 2'' W x 1.5" H
• Min. / Max. Length: 6' / 40'

Manaras SENSEDGE044UM Sensing edge – Monitored, electric edge ME-123

Model SENSEDGE044UM · Manaras

Monitored sensing edge mounted on the door bottom to stop and reverse the door on contact.

• Monitored, electric edge ME-123, 10kOhms resistor, 2-wire, universal wire outlet location, vertical / horizontal mount, for sectional doors / sliding gates / conveyors / presses, to be used with
• For sectional doors, sliding gates
• Industry Codification: ME-123
• Type: 2-wire, monitored
• UL325 Recognized Component
• Wire Outlet Location: Universal
• Vertical or horizontal mount
• Section: 2'' W x 1.5'' H

Manaras SENSEDGE045 Sensing edge – Air hose with rubber profile for pneumatic edge to be built in the field

Model SENSEDGE045 · Manaras

Sensing edge mounted on the door bottom to stop and reverse the door on contact.

• Air hose with rubber profile + end cap kit for pneumatic edge to be built in the field
• Materials: Soft rubber
• Section: 0.75'' inside Ø / 1'' outside Ø + 2 edges to be inserted in mounting channel
• Sold per inch, made-to-order lengths, no returns or exchanges
• Mounting channel available
• Replacement parts: order HOSE010, PLUG011, PLUG012

Manaras SENSEDGE046M Sensing edge – Monitored, electric edge

Model SENSEDGE046M · Manaras

Monitored sensing edge mounted on the door bottom to stop and reverse the door on contact.

• Monitored, electric edge, 10kOhms resistor, 2-wire, E/R/L wire outlet location, to be used with
• For sectional doors
• Industry Codification: Clima-GUARD
• Type: 2-wire, monitored
• UL325 Recognized Component
• Wire Outlet Location: Options available
• Horizontal mount
• Section: 2.0" W x 2.75" H (including loop seal)

Manaras SENSEMOUNT001A Sensing edge mounting channel – Mounting channel

Model SENSEMOUNT001A · Manaras

Mounting channel that holds an electric sensing edge on the door bottom.

• Mounting channel
• Applications: SENSEDGE044UM, SENSEDGE044U
• Industry Codification: ME-123-C, ME-123-C3, ME-123-C7
• Channel Shape: ''C'', ''L'', flat
• Vertical or horizontal mount
• Dimensions A ("C" shape): 2.0" W x 1.25" H
• Dimensions B ("L" shape): 2.0" W x 1.25" H
• Dimensions C (flat): 3.5" W x 0.25" H

Manaras SENSEMOUNT003A Sensing edge mounting channel – Mounting channel

Model SENSEMOUNT003A · Manaras

Mounting channel that holds an electric sensing edge on the door bottom.

• Mounting channel
• Applications: SENSEDGE007UM, SENSEDGE007U
• Industry Codification: ME-113-C, ME-113-C3, ME-113-C7
• Channel Shape: ''C'', ''L'', flat
• Vertical or horizontal mount
• Dimensions A ("C" shape): 1.5" W x 1.25" H
• Dimensions B ("L" shape): 1.5" W x 1.25" H
• Dimensions C (flat): 1.5" W x 0.25" H

Manaras SENSEMOUNT004 Sensing edge mounting channel – C-mounting channel ME-110C (other shapes available $)

Model SENSEMOUNT004 · Manaras

Mounting channel that holds an electric sensing edge on the door bottom.

• C-mounting channel ME-110C (other shapes available $)
• Mounting channel
• Applications: SENSEDGE002
• Industry Codification: ME-110-C
• Channel Shape: ''C''
• Vertical or horizontal mount
• Dimensions: 0.88" W x 0.25" H with 0.31" gap
• Other shapes available upon request

Manaras SENSLINK002 Wireless edge link – Monitored electric edge wireless link kit

Model SENSLINK002 · Manaras

Wireless transmitter/receiver kit that replaces the coil cord between a monitored electric edge and the operator.

• Monitored electric edge wireless link kit, includes transmitter and receiver, compatible with SENSEDGE007UM/018UM/044UM
• Monitored electric sensing edge wireless link kit
• Provides wireless signal transmitter from a monitored electric sensing edge to the operator
• UL325 Recognized Component
• Nema 4 enclosure (Tx)
• Housing Material: Polycarbonate (Tx), steel (Rx)
• Operation Temperature: -40°C to 60°C (-40°F to 140°F)
• Dimensions (Tx): 4.62'' W x 1.75'' H x 1.75'' D

Manaras SENSEMOUNT001 Sensing edge mounting channel – C-mounting channel ME-123C (other shapes available $)

Model SENSEMOUNT001 · Manaras

Mounting channel that holds an electric sensing edge on the door bottom.

• C-mounting channel ME-123C (other shapes available $)

Manaras SENSEMOUNT003 Sensing edge mounting channel – C-mounting channel ME-113C (other shapes available $)

Model SENSEMOUNT003 · Manaras

Mounting channel that holds an electric sensing edge on the door bottom.

• C-mounting channel ME-113C (other shapes available $)

Manaras ADAPTER051 Hose adapter – Connection adapter

Model ADAPTER051 · Manaras

Adapter fitting for pneumatic hose assemblies.

• Connection adapter, compatible with AIRSWITCH015/017, HOSE001/009
• Connection adapter, 0.09'' to 0.5'' Ø, for air hose with 0.38'' or 0.5" inside Ø
• Compatible with: AIRSWITCH015, AIRSWITCH016, AIRSWITCH017A, HOSE001, HOSE009
• Used in: AIRSWITCH015A, AIRSWITCH016B, PNEUMATIC017A, PNEUMATIC021, TREADLE002A

Manaras AIRSWITCH001 Air switch – Air switch, hazardous location enclosure

Model AIRSWITCH001 · Manaras

Air-pressure switch used in pneumatic sensing edges and treadles.

• Air switch, hazardous location enclosure, N.O. contact, 2-wire output
• Air switch
• Hazardous locations
• Materials: Aluminum
• Nema enclosure 3, 4 NEC Class I, Div 1 and 2, Groups B, C, D NEC Class II, Div 1 and 2, Groups E, F, G NEC Class III
• Type: 2-wires / NO, non-monitored
• Compatible with: ADAPTER043, COILHOSE001, COILHOSE002
• Used in: PNEUMATIC006

Manaras AIRSWITCH007 Air switch – Air switch, SPDT type N.O. & N.C. contacts

Model AIRSWITCH007 · Manaras

Air-pressure switch used in pneumatic sensing edges and treadles.

• Air switch, SPDT type N.O. & N.C. contacts, adjustable
• Air switch
• Type: 2-wires / SPDT (NO and NC)
• Materials: Plastic
• Use with: Junction box AIRSWITCH008
• Includes: Junction gasket
• Compatible with: HOSE001
• Used in: PNEUMATIC004, PNEUMATIC005, PNEUMATIC009

Manaras AIRSWITCH008 Air switch – Aluminum junction box for AIRSWITCH007

Model AIRSWITCH008 · Manaras

Air-pressure switch used in pneumatic sensing edges and treadles.

• Aluminum junction box for AIRSWITCH007
• Junction box
• Materials: Aluminum
• Use with: AIRSWITCH007
• Used in: PNEUMATIC004, PNEUMATIC005, PNEUMATIC009

Manaras AIRSWITCH015A Air switch – Air switch, SPDT type N.O. & N.C. contacts

Model AIRSWITCH015A · Manaras

Air-pressure switch used in pneumatic sensing edges and treadles.

• Air switch, SPDT type N.O. & N.C. contacts, N4X enclosure, includes adapter for HOSE001/009
• Air switch kit
• Type: 2-wires / SPST (NO), non-monitored
• Materials: Polycarbonate (air switch), silicone (tube)
• Power Supply: 220 V AC , 0.5 A max.; 48 V 1 A max.
• Dimensions: 6.63'' W x 1.75'' H x 1.75'' D
• Dimensions (tube): 0.09'' inside Ø x 12'' L
• Adaptater for tube with 0.5'' inside Ø ( HOSE009 and 0.38'' (HOSE001)

Manaras AIRSWITCH016A Air switch – Kit including IP65 rated air switch

Model AIRSWITCH016A · Manaras

Air-pressure switch used in pneumatic sensing edges and treadles.

• Kit including IP65 rated air switch, SPST type unipolar N.O. contact, end and angle plugs, compatible with HOSE010
• Air switch kit
• Type: 2-wires / SPST (NO), non-monitored
• Materials: ABS (enclosure), silicone (tube)
• Power Supply: 220 V AC , 0.5 A max. DC , ■ Dimensions: 3.97'' W x 1.91'' H x 1.89'' D
• Dimensions (tube): 0.09'' inside Ø x 6'' L
• IP65 enclosure
• Includes: Air switch, end and angle plugs, ) tube

Manaras AIRSWITCH016B Air switch – Air switch kit

Model AIRSWITCH016B · Manaras

Air-pressure switch used in pneumatic sensing edges and treadles.

• Air switch kit
• Type: 2-wires / SPST (NO), non-monitored
• Materials: ABS (enclosure), silicone (tube)
• Power Supply: 220 V AC , 0.5 A max.
• Dimensions: 3.97'' W x 1.91'' H x 1.89'' D
• Dimensions (tube): 0.09'' inside Ø x 6'' L
• Adaptater for tube with 0.5'' inside Ø ( HOSE009 ) and 0.38'' (HOSE001)
• IP65 enclosure

Manaras AIRSWITCH017A Air switch – Wireless air switch with embedded transmitter and receiver

Model AIRSWITCH017A · Manaras

Air-pressure switch used in pneumatic sensing edges and treadles.

• Wireless air switch with embedded transmitter and receiver
• Type: 2-wires / SPDT (NO and NC), non-monitored
• Materials (air switch / transmitter): ABS (enclosure), silicone (tube)
• Materials (receiver enclosure): ABS / PA6 30% FV / TPE
• Dimensions (air switch / transmitter): 3.97'' W x 1.91'' H x 1.89'' D
• Dimensions (receiver): 1.5'' W x 3'' H x 0.5'' D
• Dimensions (tube): 0.09'' inside Ø x 6'' L
• Nema 4 enclosure

Manaras AIRSWITCH018 Air switch – Air switch, SPDT type N.O. & N.C. contacts

Model AIRSWITCH018 · Manaras

Air-pressure switch used in pneumatic sensing edges and treadles.

• Air switch, SPDT type N.O. & N.C. contacts, ABS housing
• Air switch
• Type: 2-wires / SPDT (NO and NC), non-monitored
• Materials: ABS
• Nema 12 enclosure
• Dimensions: 5.25" W x 2.125" H x 2.125" D
• Compatible with: HOSE001, HOSE009
• Used in: PNEUMATIC007, PNEUMATIC008, TREADLE002

Manaras AIRSWITCH019 Air switch – Airwave wireless switch with embedded transmitter plus receiver

Model AIRSWITCH019 · Manaras

Air-pressure switch used in pneumatic sensing edges and treadles.

• Airwave wireless switch with embedded transmitter plus receiver
• Wireless air switch with embedded transmitter and receiver
• Type: 2-wires / SPDT (NO and NC), non-monitored
• Materials (air switch / transmitter): ABS (enclosure), silicone (tube)
• Power Supply: 10 to 40 V DC / 10 to 30 V AC, 50 mA max.
• Dimensions (air switch / transmitter): 3.29'' W x 1.7'' H x 1.95'' D
• Dimensions (receiver): 3.75'' W x 4.9'' H x 1.2'' D
• Dimensions (tube): 0.09'' inside Ø x 12'' L

Manaras AIRSWITCH020 Air switch – Airwave switch, N.O. contact

Model AIRSWITCH020 · Manaras

Air-pressure switch used in pneumatic sensing edges and treadles.

• Airwave switch, N.O. contact, 2-wire output, ABS housing with silicone tubing
• Air switch
• Type: 2-wires / NO, non-monitored
• Materials: ABS (enclosure), silicone (tube)
• Dimensions: 3.29'' W x 1.7'' H x 1.95'' D
• Dimensions (tube): 0.09'' inside Ø x 12'' L
• Compatible with: ADAPTER051 (HOSE001, HOSE009), PLUG012 (HOSE010)

Manaras COILHOSE001 Coiled air hose – Recoil air hose with brass connector for PNEUMATIC006

Model COILHOSE001 · Manaras

Coiled air hose used with pneumatic edges and treadles.

• Recoil air hose with brass connector for PNEUMATIC006
• Recoil air hose
• Material: Polyurethane
• Max. Cord Extension: 25'
• 1/4" EPT swivel fittings
• Operation Temperature: -36°C to 65°C (-34°F to 150°F)
• Used in: PNEUMATIC006
• Compatible with: ADAPTER043, AIRSWITCH001, COILHOSE002

Manaras HOSE001 Pneumatic edge hose – Air hose, soft rubber

Model HOSE001 · Manaras

Hose for building a pneumatic sensing edge.

• Air hose, soft rubber, EPT/EPDM, 3/8'' inside diameter, 9/16'' outside diameter
• Air hose
• Materials: EPT / EPDM
• 0.38'' inside Ø / 0.57'' outside Ø
• Compatible with: AIRSWITCH015A, PLUG005, PLUG023, PNEUMATIC004, PNEUMATIC005, PNEUMATIC006, PNEUMATIC007, PNEUMATIC008, PNEUMATIC009, PNEUMATIC017A, PNEUMATIC021
• When ordering with pneumatic sensing edge kits: order according to door width + 2'

Manaras HOSE009 Pneumatic edge hose – Air hose, soft rubber

Model HOSE009 · Manaras

Hose for building a pneumatic sensing edge.

• Air hose, soft rubber, EPT/EPDM, 1/2'' inside diameter, 3/4'' outside diameter
• Air hose
• Materials: EPT / EPDM
• 0.5'' inside Ø / 0.75'' outside Ø
• Compatible with: AIRSWITCH015A, PLUG005, PLUG023, PNEUMATIC017A
• When ordering with pneumatic sensing edge kits: order according to door width + 2'

Manaras HOSE010 Pneumatic edge hose – Air hose with rubber profile

Model HOSE010 · Manaras

Hose for building a pneumatic sensing edge.

• Air hose with rubber profile for pneumatic edge to be built in the field
• Materials: Soft rubber
• Section: 0.75'' inside Ø / 1'' outside Ø + 2 edges to be inserted in mounting channel
• Compatible with: AIRSWITCH016A, PNEUMATIC021A, SENSEDGE042

Manaras PLUG005 Pneumatic edge plug – Air hose plug for HOSE001

Model PLUG005 · Manaras

Plug or fitting for sealing and connecting pneumatic edge hose.

• Air hose plug for HOSE001
• Air hose plug
• Materials: Rubber
• Compatible with: HOSE001, HOSE009
• Used in: PNEUMATIC004, PNEUMATIC005, PNEUMATIC006, PNEUMATIC007, PNEUMATIC008, PNEUMATIC009, PNEUMATIC017A, PNEUMATIC021, TREADLE002, TREADLE002A

Manaras PLUG011 Pneumatic edge plug – Air hose plug for HOSE010

Model PLUG011 · Manaras

Plug or fitting for sealing and connecting pneumatic edge hose.

• Air hose plug for HOSE010
• Air hose end plug
• 0.86'' outside Ø
• Compatible with: HOSE010
• Used in: PNEUMATIC021A

Manaras PLUG012 Pneumatic edge plug – Air hose plug for HOSE010

Model PLUG012 · Manaras

Plug or fitting for sealing and connecting pneumatic edge hose.

• Air hose plug for HOSE010
• Angled connector end plug
• 0.86'' outside Ø
• Compatible with: HOSE010
• Used in: PNEUMATIC021A

Manaras PLUG023 Pneumatic edge plug – Air hose plug with hole

Model PLUG023 · Manaras

Plug or fitting for sealing and connecting pneumatic edge hose.

• Air hose plug with hole, compatible with HOSE001/009
• Air hose plug (with hole)
• Materials: Rubber
• Compatible with: HOSE001, HOSE009
• Used in: PNEUMATIC004, PNEUMATIC005, PNEUMATIC006, PNEUMATIC007, PNEUMATIC008, PNEUMATIC009, PNEUMATIC017A, PNEUMATIC021

Manaras PNEUMATIC004 Pneumatic sensing edge kit – Pneumatic edge kit for doors up to 14' high

Model PNEUMATIC004 · Manaras

Pneumatic edge kit: an air switch senses pressure in the bottom hose and signals the operator to reverse.

• Pneumatic edge kit for doors up to 14' high, with SPDT air switch,14' coil cord, hose plug
• Pneumatic sensing edge kit
• Type: 2-wires / SPDT (NO and NC), non-monitored
• Nema 1 enclosure (air switch)
• Materials: Plastic (air switch), aluminum (junction box)
• Coil cord: 2-wire cable, 18 gauge, 12' cord extension max.
• Rubber hose to be ordered separately according to door width + 2'
• Weather stripping not included (supplied by door manufacturer)

Manaras PNEUMATIC005 Pneumatic sensing edge kit – Pneumatic edge kit for doors up to 20' high

Model PNEUMATIC005 · Manaras

Pneumatic edge kit: an air switch senses pressure in the bottom hose and signals the operator to reverse.

• Pneumatic edge kit for doors up to 20' high, with SPDT air switch, 20' take-up reel, hose plug
• Pneumatic sensing edge kit
• Type: 2-wires / SPDT (NO and NC), non-monitored
• Nema 1 enclosure (air switch)
• Materials: Plastic (air switch), aluminum (junction box), metal (take-up reel)
• Take-up reel: 2-wire cable, 18 gauge, 20' cord extension max.
• Rubber hose to be ordered separately according to door width + 2'
• Weather stripping not included (supplied by door manufacturer)

Manaras PNEUMATIC006 Pneumatic sensing edge kit – Hazardous location pneumatic edge kit for doors up to 20' high

Model PNEUMATIC006 · Manaras

Pneumatic edge kit: an air switch senses pressure in the bottom hose and signals the operator to reverse.

• Hazardous location pneumatic edge kit for doors up to 20' high, hazardous location air switch, 20' air coil, hose plug
• Pneumatic sensing edge kit
• Type: 2-wires / NO, non-monitored
• Materials: Aluminum (air switch), polyurethane (air coil hose)
• Hazardous locations, Nema enclosure 3, 4 NEC Class I, Div 1 and 2, Groups B, C, D NEC Class II, Div 1 and 2, Groups E, F, G NEC Class III (air switch)
• Rubber hose to be ordered separately according to door width + 2'
• Weather stripping not included (supplied by door manufacturer)
• Includes: Air switch, air coil hose (max. 25' ext.) with fittings, air hose plug

Manaras PNEUMATIC007 Pneumatic sensing edge kit – Pneumatic edge kit for doors up to 14' high

Model PNEUMATIC007 · Manaras

Pneumatic edge kit: an air switch senses pressure in the bottom hose and signals the operator to reverse.

• Pneumatic edge kit for doors up to 14' high, with air switch, 14' coil cord, hose plug
• Pneumatic sensing edge kit
• Type: 2-wires / SPDT (NO and NC), non-monitored
• Nema 1 enclosure (air switch)
• Materials: ABS (air switch)
• Coil cord: 2-wire cable, 18 gauge, 12' cord extension max.
• Rubber hose to be ordered separately according to door width + 2'
• Weather stripping not included (supplied by door manufacturer)

Manaras PNEUMATIC008 Pneumatic sensing edge kit – Pneumatic edge kit for doors up to 20' high

Model PNEUMATIC008 · Manaras

Pneumatic edge kit: an air switch senses pressure in the bottom hose and signals the operator to reverse.

• Pneumatic edge kit for doors up to 20' high, with air switch, 20' take-up reel, hose plug
• Pneumatic sensing edge kit
• Type: 2-wires / SPDT (NO and NC), non-monitored
• Nema 1 enclosure (air switch)
• Materials: ABS (air switch)
• Take-up reel: 2-wire cable, 18 gauge, 20' cord extension max.
• Rubber hose to be ordered separately according to door width + 2'
• Weather stripping not included (supplied by door manufacturer)

Manaras PNEUMATIC009 Pneumatic sensing edge kit – Pneumatic edge kit for doors up to 30' high

Model PNEUMATIC009 · Manaras

Pneumatic edge kit: an air switch senses pressure in the bottom hose and signals the operator to reverse.

• Pneumatic edge kit for doors up to 30' high, with air switch, 30' take-up reel, hose plug
• Pneumatic sensing edge kit
• Type: 2-wires / SPDT (NO and NC), non-monitored
• Nema 1 enclosure (air switch)
• Materials: Plastic (air switch), aluminum (junction box), metal (take-up reel)
• Take-up reel: 3-wire cable, 16 gauge, 30' cord extension max.
• Rubber hose to be ordered separately according to door width + 2'
• Weather stripping not included (supplied by door manufacturer)

Manaras PNEUMATIC017A Pneumatic sensing edge kit – Pneumatic edge kit with N4/12 air switch

Model PNEUMATIC017A · Manaras

Pneumatic edge kit: an air switch senses pressure in the bottom hose and signals the operator to reverse.

• Pneumatic edge kit with N4/12 air switch, 30' 3-conductor take-up reel and accessories
• Pneumatic sensing edge kit
• Type: 2-wires / SPDT (NO), non-monitored
• Nema 4X enclosure (air switch)
• Materials: Polycarbonate (air switch), silicone (tube), metal (take-up reel)
• Take-up reel: 3-wire cable, 16 gauge, 30' cord extension max.
• Rubber hose to be ordered separately according to door width + 2'
• Weather stripping not included (supplied by door manufacturer)

Manaras PNEUMATIC021 Pneumatic sensing edge kit – Pneumatic edge kit with N4 wireless air switch

Model PNEUMATIC021 · Manaras

Pneumatic edge kit: an air switch senses pressure in the bottom hose and signals the operator to reverse.

• Pneumatic edge kit with N4 wireless air switch, unipolar N.O. contact, hose plug and adapter
• Pneumatic sensing edge kit
• Type: 2-wires / SPDT (NO and NC), non-monitored
• Nema 4 enclosure (air switch)
• Rubber hose to be ordered separately according to door width + 2'
• Weather stripping not included (supplied by door manufacturer)
• Includes: Air switch / transmitter, receiver, tube, adapter, air hose plug, 3V CR2032 lithium battery (Tx)
• Compatible with: HOSE001

Manaras PNEUMATIC021A Pneumatic sensing edge kit – Pneumatic edge kit with N4 wireless air switch

Model PNEUMATIC021A · Manaras

Pneumatic edge kit: an air switch senses pressure in the bottom hose and signals the operator to reverse.

• Pneumatic edge kit with N4 wireless air switch, unipolar N.O. contact, end and angle plugs, compatible with HOSE010
• Pneumatic sensing edge kit
• Type: 2-wires / SPDT (NO and NC), non-monitored
• Nema 4 enclosure (air switch)
• Rubber hose to be ordered separately according to door width + 2'
• Weather stripping not included (supplied by door manufacturer)
• Includes: Air switch / transmitter, receiver, tube, air hose end plug, angled connector end plug, 3V CR2032 lithium battery (Tx)
• Compatible with: HOSE010

Manaras AIRSWITCH017 Air switch – Airwave wireless N4 air switch transmitter and receiver units

Model AIRSWITCH017 · Manaras

Air-pressure switch used in pneumatic sensing edges and treadles.

• Airwave wireless N4 air switch transmitter and receiver units, 2-wire output N.O. contacts

Manaras COIL003 Coil cord – Coil cord, 4-wire, 18 gauge

Model COIL003 · Manaras

Coiled cord that links a door-mounted edge to the operator while the door travels.

• Coil cord, 4-wire, 18 gauge, 20' extension
• Curly coil cord
• Cables: 4-wire
• 18 gauge
• Max. Cord Extension: 20'
• Color: Red-orange
• For 25' max. extension (black only) order: COIL010

Manaras COIL007 Coil cord – Coil cord, 3-wire, 18 gauge

Model COIL007 · Manaras

Coiled cord that links a door-mounted edge to the operator while the door travels.

• Coil cord, 3-wire, 18 gauge, 20' extension
• Curly coil cord
• Cables: 3-wire
• 18 gauge
• Max. Cord Extension: 20'
• Color: Red-orange

Manaras COIL010 Coil cord – Coil cord, 4-wire, 18 gauge

Model COIL010 · Manaras

Coiled cord that links a door-mounted edge to the operator while the door travels.

• Coil cord, 4-wire, 18 gauge, 25' extension
• Curly coil cord
• Cables: 4-wire
• 18 gauge
• Max. Cord Extension: 25'
• Color: Black
• For 20' max. extension (red-orange) order: COIL003

Manaras CONNECTSET001 Connection set – Connection set for PHOTO061

Model CONNECTSET001 · Manaras

Conduit and junction-box set for wiring photo eyes or edges in conduit.

• Connection set for PHOTO061, SENSEDGE042 includes 3' flexible conduit 3/16'', junction box, hardware
• Junction box and connection set for photoelectric cell installation applications which require all wiring to be done in a conduit
• Includes: Fittings to cover both sides of the door; flexible stainless steel conduit (3' W x 3/16" Ø) (x2), junction box (x2), wire nuts
• Not included: Photoelectric cells
• Compatible with: PHOTO061 / 061A, SENSEDGE042, etc.

Manaras REELITE003 Cord reel – Metal take-up reel

Model REELITE003 · Manaras

Retractable cord reel that carries a sensing-edge signal from the moving door to the operator.

• Metal take-up reel, 3-wire, 16 gauge, 30' extension
• Metal take-up reel
• Cables: 3-wire
• 16 gauge
• Max. Cord Extension: 30'
• Includes: Take-up reel, hanging bracket

Manaras REELITE005 Cord reel – Metal take-up reel

Model REELITE005 · Manaras

Retractable cord reel that carries a sensing-edge signal from the moving door to the operator.

• Metal take-up reel, 2-wire, 18 gauge, 20' extension
• Metal take-up reel
• Cables: 2-wire
• 18 gauge
• Max. Cord Extension: 20'
• Includes: Take-up reel, hanging bracket

Manaras COIL001 Coil cord – Coil cord, 2-wire, 18 gauge

Model COIL001 · Manaras

Coiled cord that links a door-mounted edge to the operator while the door travels.

• Coil cord, 2-wire, 18 gauge, 20' extension
• Curly coil cord
• Cables: 2-wire
• 18 gauge
• Max. Cord Extension: 20'
• For 12' max. extension order: COIL014

Manaras COIL005 Coil cord – Coil cord, 2-wire, 18 gauge

Model COIL005 · Manaras

Coiled cord that links a door-mounted edge to the operator while the door travels.

• Coil cord, 2-wire, 18 gauge, 12' extension

Manaras COIL014 Coil cord – Curly coil cord

Model COIL014 · Manaras

Coiled cord that links a door-mounted edge to the operator while the door travels.

• Curly coil cord
• Cables: 2-wire
• 18 gauge
• Max. Cord Extension: 12'
• For 20' extension order: COIL001

Manaras INTERFACE001 Interface module – Interface module enables the connection of monitored photoelectric cells to a Bo

Model INTERFACE001 · Manaras

Interface module that lets a safety device talk to an operator control it was not built for.

• Interface module enables the connection of monitored photoelectric cells to a Board or Electromechanical control without monitored function, compatible with PHOTO045M/061/065/070 Electromechanical control without monitored function, compatible with PHOTO045M/061/065/070 Electromechanical control without monitored function, compatible with PHOTO045M/061/065/070
• Interface module
• Enables the connection of monitored photoelectric cells to an electronic / electromechanical control without monitoring function
• Interior use
• Nema 1 enclosure
• Materials: Plastic
• Operation Temperature: -30°C to 70°C (-22°F to 158°F)
• Power Supply: 24 V AC /V DC

Manaras INTERFACE002 Interface module – Interface module for 10kOhms resistor edges

Model INTERFACE002 · Manaras

Interface module that lets a safety device talk to an operator control it was not built for.

• Interface module for 10kOhms resistor edges, to be used with SENSEDGE007UM/018UM/044UM/046M
• Interface module
• For 10 kΩ sensing edge, designed to ensure compatibility with Manaras electronic controls
• UL325 Recognized Component
• Interior use
• Nema 4 enclosure
• Materials: ABS / epoxy potting (module), galvanized steel (junction box)
• Operation Temperature: -35°C to 70°C (-31°F to 158°F)

Manaras INTERFACE003 Interface module – Y-connect signal merging module

Model INTERFACE003 · Manaras

Interface module that lets a safety device talk to an operator control it was not built for.

• Y-connect signal merging module, N4, compatible with 2 x monitored entrapment protection devices. Compatible primary devices: PHOTO061/065/070. Secondary devices: monitored photoelectric cells, light curtains, electric sensing edges and / or non-contact sensing edges Compatible primary devices: PHOTO061/065/070. Secondary devices: monitored photoelectric cells, light curtains, electric sensing edges and / or non-contact sensing edges Compatible primary devices: PHOTO061/065/070. Secondary devices: monitored photoelectric cells, light curtains, electric sensing edges and / or non-contact sensing edges devices. Compatible primary devices: PHOTO061/065/070. Secondary devices: monitored photoelectric cells, light curtains, electric sensing edges and / or non-contact sensing edges devices. Compatible primary devices: PHOTO061/065/070. Secondary devices: monitored photoelectric cells, light curtains, electric sensing edges and / or non-contact sensing edges
• Interface module
• Used to merge two monitored devices on the same monitored input on the ECB
• Interior / exterior use
• Nema 4 enclosure
• Materials: ABS / PA6 30% GF / TPE
• Operation Temperature: -25°C to 75°C (-13°F to 167°F)
• Power Supply: 24 V AC /V DC , 15 mA

Manaras INTERFACE005 Interface module – Controller for LIGHTCURTAIN003/004

Model INTERFACE005 · Manaras

Interface module that lets a safety device talk to an operator control it was not built for.

• Controller for LIGHTCURTAIN003/004, PHOTO067/068A/B
• Interface module
• Controller for non-contact opto sensing edges and light curtains
• UL325 Recognized Component
• Interior / exterior use
• Nema 4 enclosure
• Materials: Polycarbonate
• Operation Temperature: -18°C to 55°C (-0°F to 131°F)

Manaras LIGHTCURTAIN001 Light curtain – Monitored, invisible curtain of protection 36'' detection height

Model LIGHTCURTAIN001 · Manaras

Monitored light curtain that guards the door opening with an invisible curtain of infrared beams.

• Monitored, invisible curtain of protection 36'' detection height, thru-beam type, IP67 enclosure, 12-24VAC/VDC (10VDC min.) 100mA max. at 24VDC, 32' range
• Monitored
• UL325 Recognized Component
• Type: Thru-beam
• Range: 32' (approx.)
• Detection Height: 36''
• Interior / exterior use
• IP67 enclosure

Manaras LIGHTCURTAIN002 Light curtain – Monitored, invisible curtain of protection 72'' detection height

Model LIGHTCURTAIN002 · Manaras

Monitored light curtain that guards the door opening with an invisible curtain of infrared beams.

• Monitored, invisible curtain of protection 72'' detection height, thru-beam type, IP67 enclosure, 12-24VAC/VDC (10VDC min.) 100mA max. at 24VDC, 32' range
• Monitored
• UL325 Recognized Component
• Type: Thru-beam
• Range: 32' (approx.)
• Detection Height: 72''
• Interior / exterior use
• IP67 enclosure

Manaras LIGHTCURTAIN003 Light curtain – Non-monitored, invisible curtain of protection 36'' detection height

Model LIGHTCURTAIN003 · Manaras

Non-monitored light curtain that guards the door opening with an invisible curtain of infrared beams.

• Non-monitored, invisible curtain of protection 36'' detection height, thru-beam type, IP67 enclosure, 12-24VAC/VDC (10VDC min.) 100mA max. at 24VDC, 32' range, includes INTERFACE005
• Non-monitored
• UL325 Recognized Component
• Type: Thru-beam
• Range: 32' (approx.)
• Detection Height: 36''
• Interior / exterior use
• IP67 enclosure

Manaras LIGHTCURTAIN004 Light curtain – Non-monitored, invisible curtain of protection 72'' detection height

Model LIGHTCURTAIN004 · Manaras

Non-monitored light curtain that guards the door opening with an invisible curtain of infrared beams.

• Non-monitored, invisible curtain of protection 72'' detection height, thru-beam type, IP67 enclosure, 12-24VAC/VDC (10VDC min.) 100mA max. at 24VDC, 32' range, includes INTERFACE005
• Non-monitored
• UL325 Recognized Component
• Type: Thru-beam
• Range: 32' (approx.)
• Detection Height: 72''
• Interior / exterior use
• IP67 enclosure

Hi-Intensity Red/Green Traffic Light

Model RGL-CTL · LiftMaster

IP65/NEMA4 all-weather enclosure, ideal for indoor or outdoor use Hi-intensity Sealed 18 red/green LEDs great for single lane operations that require focused visibility Daylight visibility, an ideal solution for Fire Sta

Photoelectric & Thermal Smoke Detector - 2 Wire

Model LMPDT24-2W · LiftMaster

Incorporates a state-of-the-art optical sensing chamber and an advanced microprocessor.

Photoelectric & Thermal Smoke Detector - 4 Wire

Model LMPDT24-4W · LiftMaster

Incorporates a state-of-the-art optical sensing chamber and an advanced microprocessor.

Photoelectric Smoke Detector - 2 Wire

Model LMPD24-2W · LiftMaster

Incorporates a state-of-the-art optical sensing chamber and an advanced microprocessor.

Photoelectric Smoke Detector - 4 Wire

Model LMPD24-4W · LiftMaster

Incorporates a state-of-the-art optical sensing chamber and an advanced microprocessor.

Red Horn “FIRE” Strobe

Model LMHS24R · LiftMaster

Strobes and horns provide audible and visual notification to deliver an alert of the door status.

Red/Green Traffic Light

Model RGL24LY · LiftMaster

Dramatically reduces the chance of damage to your door and engine.

Timer Light Status Option Card

Model TLS1CARD · LiftMaster

Controls auxilliary devices.

White Horn Strobe

Model LMHS24W · LiftMaster

Strobes and horns provide audible and visual notification to deliver an alert of the door status.

Advanced Fire Control Release Device

Model LM21-AFCB · LiftMaster

Internal Battery Backup system.

Extended Performance Release Device

Model LM21XPBB · LiftMaster

Internal Battery Backup system.

High Performance Release Device

Model LM21XP · LiftMaster

Provides a fail-safe release mechanism for the fire door or shutter.

16' Sectional Door Edge Kit

Model OES-SD16 · LiftMaster

Durable, flexible and easy to install.

LiftMaster® Commercial Protector System®

Model CPS-UN4 · LiftMaster

Dual-sided infrared sensors.

Optional card with CPS-U photo-eyes

Model CPSIII · LiftMaster

Continuous self-monitoring system with timer-to-close feature Industrial code technology.

Sensor Connection Box for myQ Dock Management

Model LMI5 · LiftMaster

Connects to up to 5 sensors.

Sensor Interface

Model IDOCK-LINK · LiftMaster

IDock Link connects up to 10 sensors to myQ Dock Management.

TRAILER PRESENCE SENSOR

Model PRE-SENSOR · LiftMaster

Identifies when a truck has arrived or left a dock.

Additional Door Sensor for Smart Garage® Control, myQ® Smart Garage® Hub and myQ Garage®

Model 821LMC-SENSOR · LiftMaster

Add control of your second garage door opener to Smart Garage™ Control, myQ® Smart Garage™ Hub or myQ Garage®.

DOOR SENSOR, LM, myQ®

Model 041D7924-1 · LiftMaster

This product number is discontinued and/or is no longer available.

Motor and Sensor, 12VDC

Model 041D0843 · LiftMaster

041D0843 is a one piece 12VDC Motor and sensor replacement kit.

Motor with Positioning Sensor

Model 041D0794 · LiftMaster

041D0794 is a Motor with Positioning Sensor Replacement Kit.

RPM SENSOR KIT

Model 041C4398A · LiftMaster

041C4398A is a RPM Sensor Replacement Kit.

RPM Sensor Kit

Model 041C4672 · LiftMaster

041C4672 is a RPM sensor replacement kit.

SAFETY SENSOR BRACKET KIT

Model 041A5266-3 · LiftMaster

LiftMaster SAFETY SENSOR BRACKET KIT (model 041A5266-3) — sensor parts & brackets, listed under safety & sensors in our LiftMaster range. Ask us to confirm fit for your door or opener.

SAFETY SENSOR BRACKETS, 2021 TO PRESENT

Model 041-0155-000 · LiftMaster

041-0155-000 is a replacement Safety Sensor Bracket Kit.

SAFETY SENSOR EXTENSION BRACKET KIT

Model 041A5281-1 · LiftMaster

041A5281-1 is a Safety Sensor Extension Bracket Replacement Kit.

SAFETY SENSOR KIT

Model 041A5034 · LiftMaster

This part# has been discontinued and is no longer available .

SAFETY SENSOR KIT, 2021 TO PRESENT

Model 041-0136 · LiftMaster

041-0136 is a Safety Sensor Replacement Kit.

SENSOR EYES AND BRACKETS, 1997 TO CURRENT

Model 041-0365-000 · LiftMaster

041-0365-000 is a replacement Safety Sensor Eye and Bracket Kit.

Safety Sensor Mounting Kit

Model 041A6569 · LiftMaster

041A6569 is a safety sensor mounting kit that is compatible with various garage door openers manufactured after 1993.

Safety Sensor Sunblocker Kit

Model 041B0873 · LiftMaster

041B0873 is a Safety Sensor Sun-blocker Kit.

CAPXL Loop Detector Input Board

Model LPEXP · LiftMaster

Automatically trigger a phone call to a guard or office when a guest arrives Mounts inside of CAPXL Works with CAPXL and LOOPDETLM Plug In Loop Detector

LiftMaster No-Enclosure Plug-in Loop Detector Board

Model G714167NH · LiftMaster

Plug-in style for simple and easy installation